Central Cone Blending Silo for Cement Plant
Key Specifications / Features
Model No.: SSP-02 Hits: 275
Central cone blending silo supplier in China provides reliable central cone blending silo for raw materials storage and homogenizing in cement plant.
Request a quote
Share
Tags:
Next: Cement Air Slide Conveyor
Previous: Cement Silo Aeration Pads
Detail Infomation
Central cone blending silo (IBAU silo) uses continuous homogenizing technology, and is equipped with an additional homogenizing silo outside central cone silo. A big cone is designed and installed in the bottom of IBAU silo, so raw material inside silo can slip to the silo bottom. Annulus space of the bottom silo is divided into six aerating zones and circular room on the bottom silo is divided into six aerating zones that are inclined at 10° to the silo center, and each zone is equipped with a variety of aeration pads. Raw materials are conveyed to one radial aerating path when processing aerating or discharging, and then are conveyed to center mixing silo by air slide conveyor equipped at the below position of silo. During the discharging process, a mixing effect of gravity formed from different horizontal material layer vertically produced by materials falling down and a further homogenization in the mixing silo is done for materials with continuously pneumatic blending. The homogenizing value can reach the range of 6-8 and electricity consumption is 0.1-0.2kwh/t of raw material.
FEATURES & BENEFITS
• First Class Quality
• Reliable Performance
• Quiet
• Easy Maintenance
• Good Homogenizing Effect
APPLICATION
Cement raw material storage and homogenizing
FEATURES & BENEFITS
• First Class Quality
• Reliable Performance
• Quiet
• Easy Maintenance
• Good Homogenizing Effect
APPLICATION
Cement raw material storage and homogenizing
| TECHNICAL PARAMETERS | |||
| SR.# | Equipment | Specification and Type | Quantity |
| 1 | NBS Plate Chain Bucket Elevator | 1 Set | |
| 2 | Overflow Type Raw Material Distributor | Ф1250mm,a=6° | |
| 3 | Airslide | a=6° | 2 Units |
| 4 | Pulse Valve Type Bag Filter | 1 Set | |
| 5 | Fan | 9-26 No.8D | 6 Units |
| 6 | Electrical Butterfly Valve | DN=550 | 8 Units |
| 7 | Valves for Bag Filter Pipe System | 220 Units | |
| 8 | Aerationn Pads and Pipe System | 1 Set | |
| 9 | Spiral Damper | B200 | 6 Units |
| 10 | Pneumatic On-Off Valve | B200 | 6 Units |
| 11 | Electrical Material Flow Control Valve | B200 | 6 Units |
| 12 | Airslide | XZ200x1300mm,a=6° | 6 Sets |
| 13 | Raw Material Measurable Feeder | 1 Set | |
| 14 | Spiral Damper | B250 | 2 Sets |
| 15 | Pneumatic On-Off Valve | B250 | 2 Sets |
| 16 | Electrical Material Flow Control Valve | B250 | 2 Sets |
| 17 | Airslide | XZ250x700mm,a=6° | 2 Units |
| 18 | Solid Flowmeter | DLM | 1 Set |
| 19 | Bag Filter | FHW-III | 1 Set |
| 20 | Silo Bottom Bag Filter Manual Control Valve | Ф300 | 2 Sets |
| 21 | Roots Blower | JRD-125 | 3 Sets |
| 22 | Pressure Relief Valve | 14 Units | |
| 23 | Solenoid Valve | 14 Units | |
| 24 | Manual Stop Valve | Ф150 | 14 Units |
| 25 | Axial Flow Fan | 1 Set | |
| 26 | Belt Conveyor | DTSB500mm | 1 Set |
